GREENLOOP HD NEUTRAL DEGREASER is a ready-to-use industrial cleaning and degreasing product designed for the removal of oils, greases, machining fluids, workshop soiling and technical residues from metal and other chemically resistant industrial surfaces.
Ready to use. Do not dilute with water.
The product is intended for cleaning the following areas:
Ready to use. Do not dilute with water. Test on a small, inconspicuous area before full application.
Apply by low-pressure sprayer, wiping, brushing, immersion, recirculation cleaning, industrial parts washer or ultrasonic cleaning equipment. Application temperature: ambient temperature to 50°C.
Use the shortest effective contact time. Do not allow the product to dry on the surface. If required, a brush, cloth, pad or suitable gentle cleaning tool may be used.
After cleaning, rinse thoroughly with clean water. Remove residual water and allow the surface to dry completely.
GREENLOOP HD NEUTRAL DEGREASER is supplied as a ready-to-use product.
Indicative average coverage: approx. 10 m²/L.
Typical coverage may range from approx. 5–15 m²/L.
Actual product consumption depends on:
Higher consumption is to be expected on heavily soiled, rough, porous or geometrically complex surfaces.
Lower consumption may be achieved on smooth surfaces with light to moderate soiling and controlled application.
Compatibility must always be confirmed prior to routine or full-scale application.
Use only chemically compatible pumps, hoses, seals, valves and transfer equipment.
Issued on 05 August 2026
GREENLOOP HD NEUTRAL | TECHNICAL DATA SHEET | Version 1.0